Jenn-Air JMW3430 Use & Care Manual

Also see for JMW3430: Use and care guide Use & care guide Use & care guide Use & care guide

Contents

10Clock1. From the Setup Menu, touch the button beside Clock.2. Enter the time using the on-screen number keyboard. A validtime must be entered in order to save the settings.3. If Clear is pressed, the clock clears to 00:004. Choose AM, PM, or 24-Hour.5. Touch ON/OFF to toggle between Auto Daylight SavingsTime. When “On,” the clock will automatically be adjustedwhen daylight saving time occurs.6. Choose ANALOG or DIGITAL for clock style.7. Touch SAVE. This will return you to the Clock Screen.Date1. From the Setup Menu, touch the button at right-hand side ofscreen beside Date.2. Enter the day using the on-screen number keyboard.3. Choose the month using the “<” or “>” buttons.4. Choose the year using the “<” or “>” buttons.5. Touch SAVE. This will return you to the Clock Screen.Sound Volume1. From the Setup Menu, touch the button at right-hand side ofscreen beside Sound Volume.2. Adjust the timer, button press, or alert sounds; use the sliderbar to enter desired sound levels.3. Touch ON/OFF to toggle between settings for start-up andshut-down sounds. When “On,” the oven will make a soundwhen it transitions in and out of idle mode. When “Off,” nosounds will be made.4. If the Cancel button is touched, the sounds settings will go tothe recommended level.5. Touch SAVE. This will return you to the Clock Screen.Screen Theme1. From the Setup Menu, touch the button at right-hand side ofscreen beside Screen Theme.2. Use the sliding bar to select a screen theme to matchyour oven.3. Toggle between Orange and Blue to define your accent color.4. Touch SAVE. This will return you to the Clock screen. Thefollowing message will show: “You have selected a newtheme. The oven will reset momentarily. Please wait.” It willtake 1 minute to restart the oven with the new settings.Screen Brightness1. From the Setup Menu, touch the button besideScreen Brightness.2. Use the slider bar to adjust the screen brightness.3. Choose “Dim The Screen” or “Turn-Off The Screen” for usewhen the oven has been idle for 5 minutes.4. If the Cancel button is touched, the screen brightness will goto the recommended level and return you to the clockdisplay screen.5. Touch SAVE. This will return you to the Clock Screen.Language1. From the Setup Menu, touch the button at the right-hand sideof screen beside Language.2. From the Language Menu, select your language: Englishor Français.3. If Cancel button is touched, the language will go back to thedefault setting.4. Touch SAVE. This will return you to the Clock Screen.Temperature Units1. From the Setup Menu, touch the button at the right-hand sideof screen beside Temperature Units.2. Select a temperature unit: Fahrenheit or Celsius. Togglebetween °F/°C.3. You will remain in the Setup Menu.Touchscreen CalibrationIMPORTANT: If the buttons on the screen are difficult to touchaccurately, you may need to calibrate the touchscreen. Thisprocess is recommended when the oven is installedunder a counter.1. From the Setup Menu, touch the button at the right-hand sideof screen beside Touchscreen Calibration.2. You will be asked to touch and hold 3 targets to calibrate.3. Touch NEXT.4. Touch and hold the center of the targets for 2 secondson the screen.5. Test calibration by moving the circle around the screen.Ensure you can reach all the corners.6. Touch TRY AGAIN to run calibration again.7. If Cancel is touched, the Touchscreen Calibrationwill be canceled.8. Touch SAVE. This will return you to the Setup Menu.Reset All Settings To Factory Defaults1. From the Setup Menu, touch the button at the right-hand sideof screen beside Reset All Settings to Factory Default.2. Touch RESET or CANCEL.3. If Reset is touched, the following sets will be lost: most usedmodes/foods, My Creations, Date/Time, and Language. TheWelcome Guide will appear in order to help you resetthese settings.