Jenn-Air W10130023A Installation Instructions And Use & Care Manual

Contents

93. Check for leaks. Tighten any connections (includingconnections at the valve) or nuts that leak.4. The ice maker is equipped with a built-in water strainer. Ifyour water conditions require a second water strainer, installit in the ¹⁄₄" (6.35 mm) water line at either tube connection.Obtain a water strainer from your nearest appliance dealer.5. Plug in refrigerator or reconnect power.Move the Refrigerator Drawers toFinal Location1. Place top of cardboard carton or plywood under theappliance. Remove dolly.2. Do not remove film or cover.3. Plug into a grounded 3 prong outlet.4. Move the refrigerator drawers straight back and evenly infront of the opening.Level the Refrigerator DrawersIMPORTANT:■ Style 2–Overlay: Be sure to install the custom overlay drawerpanels before leveling the refrigerator drawers for the OverlayModel. See “Style 2: Install Custom Overlay Drawer Panels.”■ Before installing the refrigerator drawers, be sure that thecountertop is level.■ If the countertop is not level, adjust the refrigerator drawers’leveling legs until the appliance is square with the countertop.Be sure to maintain ³⁄₈" (9.5 mm) minimum gap between thetop of the drawer and the countertop.1. Open the top drawer and place the level across the topdrawer as shown. Check the level from left to right.2. Turn the leveling legs (front and back) until the top drawermeasures level from left to right.3. Remove the level and close the top drawer. Check the gapbetween the top of the drawer and the countertop. If the gapmeasures less than ³⁄₈" (9.5 mm) minimum, turn all fourleveling bolts equally to the left to raise the leveling legs (thiswill lower the appliance). Recheck the level.4. Open both drawers less than midway. Place the level on theside flange beside the drawers as shown. Turn the frontleveling bolts together in order to either raise or lower theappliance until the sides of the refrigerator drawers areplumb.A. PlugB. Compression nutC. Pex tubingABCElectrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove ground prong.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions can result in death,fire, or electrical shock.WARNINGA. Check the level from left to right.A. Check the levelfrom front to back.AA