Jensen SMPS-622 User Manual

Contents

Jensen SMPS-622 User Manual Manual pdf 9 page image

TURNING THE SPEAKER POWER ON/OFF1. In Power Off mode, set the POWER ON /OFF switch to ON position toturn on the unit, the blue backlight LED under the button will lightup and fast flashing to avialable for Bluetooth enable devices forsearching.2. In Power On mode, set the POWER ON /OFF switch to OFF position toturn off the unit, the red/blue backlight under the button will goesoff.BLUETOOTH OPERATIONSlide the Power switch to the ON position and follow the directions below toconnect via Bluetooth.PAIRING (Linking) a BLUETOOTH ENABLED cell phone OR OTHERBLUETOOTH ENABLED DEVICE to the SMPS-622If the SMPS-622 has never been paired with a Bluetooth device before. You need tofollow the pairing instructions below to link the SMPS-622 with your Bluetoothdevice.1. Wait 5 seconds after the power switch is turned on, the Blue LED backlight on theButton will be flashing fast. The SMPS-622 is ready to pair (link) withyour Bluetooth device.2. Turn on the Bluetooth feature of your cell phone and enable the search or scanfeature to find the SMPS-622.3. Select "SMPS-622" from the device list when it appears on your screen. Ifrequired, enter the pass code “0000” to pair (link) the SMPS-622 with your cellphone. A beep sound will be heard if paring succesful and blue LED backlightwill begin flashing slow.4. After successfully pairing (linking) your cell phone with the SMPS-622, you canplay music from your cell phone wirelessly to the SMPS-622.5. If you want to connect the SMPS-622 to another cell phone after pairingsuccessfully, press and hold for 2 seconds, the Blue LED backlight willchange to flashing fast, repeat step 2-4 above.Note : 1.)The SMPS-622 may automatically reconnected to a previously linkeddevice that is in range, so you may need to turn off the Bluetooth onany paired device first before going through the above steps.2.) If you press and hold the Button for 10 seconds, it willautomatically clear all the saved Bluetooth connections in theSMPS-622 and create a new pairing mode set-up.NOTE to iPhone/iPod/iPad users : If you are using an iPhone, iPod oriPad and you clear all the Bluetooth connections stored in the SMPS-622,you may need to delete (‘‘Forget this Device’’) the previous connectionwith the SMPS-622 located in the Devices list under Bluetooth settings.Once the SMPS-622 connection is deleted from the Devices list, you will8