Jensen VM9022 - DVD Player With LCD Monitor Installation And Operation Manual

Also see for VM9022 - DVD Player With LCD Monitor: Installation and operation manual Quick start guide Installation and operation manual

Jensen VM9022 - DVD Player With LCD Monitor Installation And Operation Manual Manual pdf 28 page image

24VM9022DVD/VCD VIDEO OPERATIONNOTE: When properly installed, DVD video cannot bedisplayed on the main TFT screen unless the parkingbrake is applied. If you attempt to play a DVD while thevehicle is moving, the TFT screen displays “PARKING”with a blue background. Rear video screens, ifapplicable, will operate normally.Inserting a DiscTo insert a disc, you must first press the OPEN button (1) onthe control panel or the OPEN/CLOSE button on the remotecontrol to reveal the disc slot (22). Insert a disc, label side up,into the disc slot. The front panel will close automatically anddisc play begins.NOTE: If Parental Lock (Rating) is activated and the discinserted is not authorized, the 6-digit code must beentered and/or the disc must be authorized (see “GeneralSub-menu Features” on page 17).You cannot insert a disc if there is already a disc in the unit orif the power is off.NOTE: DVD-R and DVD-RW will not play unless therecording session is finalized and the DVD is closed.Ejecting a DiscTo eject a disc, you must first press the OPEN button (1) onthe control panel or the OPEN/CLOSE button on the remotecontrol to reveal the disc slot (22). Press the button (21) onthe unit or remote control (35) to eject the disc. The unitautomatically reverts to Tuner mode. You may eject a discwith the unit powered off. The unit will remain off after thedisc is ejected.Reset the Loading MechanismIf the disc loads abnormally or an abnormal core mechanismoperation occurs, press and hold the button (21) on theunit or remote control (35) to reset the loading mechanism.Normal operation resumes.Accessing DVD ModeTo switch to DVD mode when a disc is already inserted,press the SRC button (15) on the front panel or remotecontrol (8) until “DISC” appears at the bottom of the screen.Controlling PlaybackTo access the on-screen controls, touch the screen. Touchthe 1/2 button to view a second page of controlsStopping PlaybackTouch the stop button ( ) on the screen or press the /BAND button (20) on the remote control to stop DVD play.Pausing PlaybackTouch the pause button (||) on the screen (or press the >/||button on the remote control) to suspend disc playback.Press the > button on the screen to resume disc playback.Fast Forward PlaybackPress the /\ button on the joystick or the >> button on thescreen to fast forward. Keep pressing and releasing thebutton to increase the rate from “2X” to “4X”, “6X”, and “8X”.Press the joystick Enter button (18) on the remote control ortouch the play button (>) to resume normal playback.Fast Reverse PlaybackPress the \/ joystick button or touch the << button on thescreen to play the current title in fast reverse. Keep pressingand releasing the button to increase the rate from “2X” to“4X”, “6X”, and “8X”.Press the joystick Enter button (18) on the remote control ortouch the play button (>) to resume normal playback.Slow Forward/Slow Reverse PlaybackPress the ||>/BAND button on the remote control to slowforward/slow reverse. Keep pressing and releasing the buttonto increase the slow forward rate from “2X” to “4X” and “8X”and then begin slow reverse.Repeat PlaybackPress the RPT button (19) on the control panel, the RPTbutton (7) on the remote control, or the button on screento alter repeat mode according to the following:• DVD: Repeat Chapter, Repeat Title, Repeat Off• VCD (PBC Off): Repeat Single, Repeat OffNOTE: For VCD play, the repeat function is not availableif PBC is on.Sectional Repeat Function (A-B)Use the A-B function to define a specific area of a disc torepeat.• Press the RPT A-B button (6) on the remote control (orthe A-B button on screen) to set the start point (A) of therepeated section.• Press the RPT A-B button again once you reach thedesired end point (B) of the repeated section. Theselected portion of the DVD will now repeatcontinuously.• Press the RPT A-B button again to cancel the A-Bsection setting and stop repeat play.Random PlaybackWith a DVD, VCD, or CD playing, press the RDM button onthe control panel (21) or remote control (33) to activaterandom playback and play all chapters/tracks in randomorder. “On” appears on the screen.Press the > button on the joystick to play the next randomtrack.Press the RDM button again to turn random play off.NOTE: When a VCD is playing with PBC turned “On”,activating random playback automatically turns PBC off.Picture in Picture (PIP)Press the PIP button (30) on the remote control to view aPicture in Picture image of the Front source, Rear Zone orNAV screen. Use the left/right arrows at the bottom of theimage to change the PIP source.Accessing the DVD MenuPress the MENU button (1) on the remote control to recall themain DVD menu. Use the joystick to select a title from themenu or touch the title on screen.Press the TITLE button (2) on the remote control or on screen to select a different title for playback.1/2BACKMENU 2/2PIPDISPEQAUDIOA-BTITLESUBTITLEREAR