Jensen VM9312 Instruction Manual

Also see for VM9312 - DVD Player With LCD Monitor: Instruction manual

Jensen VM9312 Instruction Manual Manual pdf 16 page image

12VM9312OPERATING INSTRUCTIONSPower On / OffPress the /SRC button (6) on the unit (or the button (4)on the remote control) to turn the unit on. The buttons on thefront of the unit light up and the current mode status appearsin the LCD (7). You can also turn on the unit by pressing theOPEN button (1) and opening the TFT screen.Press and hold the button to power off the unit.The monitoris drawn back into the main compartment.Audible Beep ConfirmationAn audible beep tone confirms each function selection. TheBeep tone can be disabled through the Setup menu.MutePress the MUTE button (8) on the front panel or the MUTEbutton (3) on the remote to mute the volume from the unit.Press the MUTE button again to restore the volume. “MUTE”is displayed on the LCD. Adjusting the volume or using any ofthe audio setup features cancels the mute function.Playing Source SelectionPress the SRC button (6) on the front panel or the SRCbutton (8) on the remote to change between available playingsources in the following order: AM/FM, DISC, AUX IN1, AUXIN2, SAT, and CAMERA. The playing mode is displayed onthe TFT and LCD screens.External peripheral devices can be connected to this unit viaRCA output or MediaLink. Select “AUX-IN1” or “AUX IN2”mode to access and control connected auxiliary devices.Volume AdjustmentTo increase or decrease the volume level, turn the rotaryencoder (5) on the front panel or press the VOL+/ VOL-buttons (15, 16) on remote control. When the volume levelreaches “0” or “40”, a beep sounds, indicating that theadjustment limit has been reached. The volume ranges from“0” to “40”. The LCD or TFT screen displays the volume levelfor 3 seconds.Audio Control MenuThe Audio Control feature allows you to easily adjust youraudio system to meet the acoustical characteristics of yourvehicle, which vary depending on the type of vehicle and itsmeasurements. Proper setting of the Fader and Balanceboosts the effects of the cabin equalizer.Press the AUDIO button (5) on the front panel once to displaythe audio menu. To adjust an audio feature:1. Turn the rotary encoder (5) on the front panel, press the(>>|)/(|<<) buttons (14, 22) on the remote control, or usethe joystick to highlight the audio feature to be adjusted.2. Press the joystick button (13) to select the highlightedoption.3. Rotate the AUDIO button (5), press the |<<, >>|, >>, or<< buttons (17, 19, 14, 22) on the remote control, or usethe joystick to adjust the selected feature to the desiredsetting.NOTE: The EQ mode will automatically change to“USER” when individual audio functions are adjusted.The Audio menu will automatically exit after a few seconds ofinactivity. To exit quickly, touch the top left corner of thescreen or press and hold the AUDIO button (5).System ResetTo correct a system halt or otherillegal operation, use the tip of a pento press the reset button (12) locatedon the front bottom-right corner of the unit. After a systemreset, the unit restores all factory default settings.NOTE: If the unit is reset while a DVD is playing, the DVDresumes play once the reset is complete.Line MuteIf the “MUTE” wire is connected, audio output mutes when atelephone call is received by the car phone or when verbalnavigation is performed.Table 4: Audio AdjustmentsAudio Function Adjustable RangeEQ UserAcousticUrbanRaveLatinDanceHip HopRockBASS -14 to +14MID -14 to +14TREBLE -14 to +14SUB -14 to 0FAD GridBAL Grid[RESET] Button