Jensen VM9411 Instruction Manual

Also see for VM9411: Instruction manual Instruction manual

Jensen VM9411 Instruction Manual Manual pdf 20 page image

18VM9411Adjusting the ClockMethod 1 – TFT screen open:1. Access the “Clock” setting under the General Setupmenu.2. Press the >> or << buttons (14, 22) on the remotecontrol or the /\ or V buttons (18, 19) on the joystick tomove the cursor to the “Hour” or “Min” position.3. Press the |<<, or >>| buttons (17, 19) on the remotecontrol or the < or > buttons (16, 17) on the joystick toadjust the hour or minutes.4. Press the << button (14) on the remote control to confirmsetup.Method 2 – TFT screen closed:1. Press and hold the DISP button (5) until the clockflashes in the LCD display.1. Press the /\ or V buttons (18, 19) on the joystick to movethe cursor to the “Hour” or “Min” position.2. Press the < or > buttons (16, 17) on the joystick to adjustthe hour or minutes.3. Press the DISP button (5) on the unit to confirm setup.Returning to the System Setup MenuTo return to the System Setup menu, move to , thenpress the >/|| button on the remote control.ASP (Audio Sound Processing) ConfigMenuThe ASP Config Menu allows you to make fine audioadjustments.Accessing the ASP Config MenuTo access the “ASP CONFIG” Menu, press the directionbuttons on the joystick (16, 17, 18, 19) or remote control (14,17, 18, 19, 22) to highlight “ASP CONFIG” in green. Pressthe >/|| button (18) on the remote control to enter the “ASPCONFIG” menu. A menu appears with the option for the firstitem, “Bass Center Freq”, highlighted in light blue.Adjusting a Feature1. Enter the option field for the feature you want to adjustby pressing the >/|| button (18) on the remote or bypressing the ENTER (joystick) button (20) on the unit. Asubmenu appears in a second row with the selectedoption highlighted in light blue.2. Select a new value by pressing the >> or << buttons (14,22) on the remote control or the /\ or V buttons (18, 19)on the joystick.3. Confirm your selection by pressing the <<, |<<, or >>|buttons (14, 17, 19) on the remote control, or the < or >button (16, 17) on the joystick. The new value ishighlighted in light blue and setup is complete.Exiting the System Setup MenuTo exit setup mode and resume normal playback, press theSYS SETUP button (31) on the remote control or the DISPbutton (5) on the front panel.Table 8: ASP Config Menu FeaturesSetting Options FunctionBass CenterFreq60Hz According to the audio source, selectthe Bass Center Frequency toachieve the best Bass effect.80Hz100Hz130Hz150Hz200HzTreble CenterFreq10KHz According to the audio source, selectthe Treble Center Frequency toachieve the best Treble effect.12.5KHz15KHz17KHzSub Filter 80Hz Selecting a crossover frequency setsa cut-off frequency of the subwoofer'sLPF (low-pass filter) and the“SMALL” speakers' HPF (high-passfilter). The Crossover frequency set-ting has no effect if the subwoofer isset to “OFF” and any other speaker isset to “LARGE”.120Hz160HzSub Phase 0D Subwoofer output IN phase180D Subwoofer output OUT OF phaseNOTE: Depending on your installa-tion, reversing the subwoofer phasemay increase Bass output.Bass Q-Factor 1.0 When the Bass Center Frequency isselected, adjusting the Bass Q-Fac-tor alters the sharpness of the Bassoutput.1.251.52.0Return to previous menu.Table 8: ASP Config Menu FeaturesSetting Options Function