Jensen VX3012 Operation Manual

Also see for VX3012: Installation & quick start guide Operation manual

27Adjusting the Fader and BalanceThe user can adjust front/rear fader settings, L/R balance settings, and subwooferlevels here.1. Enter the EQ setup mode.2. Touch the [ ] icon in the EQ interface menu.Balance- This feature is used to balance the audio output levels between the leftand right side of the vehicle. Touch the t or u icons to change the balance controlsettings -12 (Left) to +12 (Right). The setting can also be changed by touchingscreen within the grid to move the blue sphere.Fader- This feature is used to fade the audio output levels between the frontand rear of the vehicle. Touch thep or q icons to change the fade controlsettings -12 (Rear) to +12 (Front). The setting can also be changed by touchingscreen within the grid to move the blue sphere.Sub (Subwoofer)- This feature is used to reduce or increase the subwoofersound level. Touch the slide bar t or u icons to adjust the subwoofer volume from-12 to +12. This setting will vary depending on the input level setting of yoursubwoofer amplifier.To exit the balance-fader touch the return icon on the top left corner of the screen.Figure 19. Fade-Balance Adjustment ScreenNOTE:• The EQ mode will change to ‘User’ automatically when you adjust the frequencyvalue in all modes besides ‘User’.VX3012