Jensen VX4010 Operating Instructions Manual

Also see for VX4010: Installation guide

Jensen VX4010 Operating Instructions Manual Manual pdf 63 page image

63VX40108. Touch the “Pair” icon on the unit’s Bluetooth® user interface screen.9. A prompt to pair or bond should appear on your mobile phone. Accept therequest and initiate the process.NOTE: Some mobile phones require a “pass key” or pairing code to connect. Ifyour phone requires a pass key or pairing code, you will need to enterthis number. The default pairing code for many mobile phones is “0000”.The default code for the unit is “0000”.10. A prompt to enter a PIN number or passkey for the unit should appear. Thedefault passkey for the unit is “0000”.11. At this point a prompt stating pairing successful should appear. Anotherprompt should appear asking connect to the unit, Yes or NO. Touch Yes. Themobile phone and the unit should connect. The mobile phone should displaya message similar to “Device Connected” and the mobile phone and the unitare now connected. VX4010 will appear on the mobile phone list of devices.Managing Incoming CallsWhen connected to a Bluetooth® mobile phone, the unit will mute audio output,pause CD play, and change to the Bluetooth® screen below when a call is received.The incoming phone number or assigned name for that number will appear onthe screen. An audible tone will sound from the unit and a graphic display willappear on the front panel.Bluetooth Incoming Call Screen1. icon: Touch to answer an incoming call.2. icon: Touch to end an in coming call.