Jet J-2221VS Operating Instructions And Parts Manual

Also see for J-2221VS: Operating instructions and parts manual Operating instructions and parts manual

4Warning- Misuse of this machine can cause seriousinjury.- For safety, machine must be set up, used andserviced properly.- Read, understand and follow instructions inthe Operating Instructions and Parts Manualwhich was shipped with your machine.When setting up machine:- Always avoid using machine in damp orpoorly lighted work areas.- Always be sure the machine support issecurely anchored to the floor or the workbench.When using machine:- Always wear safety glasses with side shields(See ANSI Z87.1)- Never wear loose clothing or jewelry.- Never overreach—you may slip and fall.When servicing machine:- Always disconnect the machine from itselectrical supply while servicing.- Always follow instructions in OperatingInstructions and Parts Manual when changingaccessory tools or parts.- Never modify the machine without consultingWalter Meier (Manufacturing) Inc.You—the stationary power tool user—holdthe key to safety.Read and follow these simple rules for bestresults and full benefits from your machine.Used properly, JET machinery is among thebest in design and safety. However, anymachine used improperly can be renderedinefficient and unsafe. It is absolutely mandatorythat those who use our products be properlytrained in how to use them correctly. Theyshould read and understand the OperatingInstructions and Parts Manual as well as alllabels affixed to the machine. Failure in followingall of these warnings can cause serious injuries.Machinery General Safety Warnings1. Always wear protective eye wear whenoperating machinery. Eye wear shall beimpact resistant, protective safety glasseswith side shields which comply with ANSIZ87.1 specifications. Use of eye wear whichdoes not comply with ANSI Z87.1specifications could result in severe injuryfrom breakage of eye protection.2. Wear proper apparel. No loose clothing orjewelry which can get caught in movingparts. Rubber soled footwear is recom-mended for best footing.3. Do not overreach. Failure to maintain properworking position can cause you to fall intothe machine or cause your clothing to getcaught, pulling you into the machine.4. Keep guards in place and in proper workingorder. Do not operate the machine withguards removed.5. Avoid dangerous working environments. Donot use stationary machine tools in wet ordamp locations. Keep work areas clean andwell lit.6. Avoid accidental starts by being sure thestart switch is “OFF” before plugging in themachine.7. Never leave the machine running whileunattended. Machine shall be shut offwhenever it is not in operation.8. Disconnect electrical power before servicing.Whenever changing accessories or generalmaintenance is done on the machine,electrical power to the machine must bedisconnected before work is done.9. Maintain all machine tools with care. Followall maintenance instructions for lubricatingand the changing of accessories. No attemptshall be made to modify or have makeshiftrepairs done to the machine. This not onlyvoids the warranty but also renders themachine unsafe.10. Machinery must be anchored to the floor.11. Secure work. Use clamps or a vise to holdwork, when practical. It is safer than usingyour hands and it frees both hands tooperate the machine.