Jet J-2221VS Operating Instructions And Parts Manual

Also see for J-2221VS: Operating instructions and parts manual Operating instructions and parts manual

Jet J-2221VS Operating Instructions And Parts Manual Manual pdf 4 page image

4Warning- Misuse of this machine can cause seriousinjury.- For safety, machine must be set up, used andserviced properly.- Read, understand and follow instructions inthe Operating Instructions and Parts Manualwhich was shipped with your machine.When setting up machine:- Always avoid using machine in damp orpoorly lighted work areas.- Always be sure the machine support issecurely anchored to the floor or the workbench.When using machine:- Always wear safety glasses with side shields(See ANSI Z87.1)- Never wear loose clothing or jewelry.- Never overreach—you may slip and fall.When servicing machine:- Always disconnect the machine from itselectrical supply while servicing.- Always follow instructions in OperatingInstructions and Parts Manual when changingaccessory tools or parts.- Never modify the machine without consultingWalter Meier (Manufacturing) Inc.You—the stationary power tool user—hold thekey to safety.Read and follow these simple rules for best resultsand full benefits from your machine. Used properly,JET machinery is among the best in design andsafety. However, any machine used improperly canbe rendered inefficient and unsafe. It is absolutelymandatory that those who use our products beproperly trained in how to use them correctly. Theyshould read and understand the OperatingInstructions and Parts Manual as well as all labelsaffixed to the machine. Failure in following all ofthese warnings can cause serious injuries.Machinery General Safety Warnings1. Always wear protective eye wear whenoperating machinery. Eye wear shall be impactresistant, protective safety glasses with sideshields which comply with ANSI Z87.1specifications. Use of eye wear which does notcomply with ANSI Z87.1 specifications couldresult in severe injury from breakage of eyeprotection.2. Wear proper apparel. No loose clothing orjewelry which can get caught in moving parts.Rubber soled footwear is recom-mended forbest footing.3. Do not overreach. Failure to maintain properworking position can cause you to fall into themachine or cause your clothing to get caught,pulling you into the machine.4. Keep guards in place and in proper workingorder. Do not operate the machine with guardsremoved.5. Avoid dangerous working environments. Donot use stationary machine tools in wet ordamp locations. Keep work areas clean andwell lit.6. Avoid accidental starts by being sure the startswitch is “OFF” before plugging in themachine.7. Never leave the machine running whileunattended. Machine shall be shut offwhenever it is not in operation.8. Disconnect electrical power before servicing.Whenever changing accessories or generalmaintenance is done on the machine,electrical power to the machine must bedisconnected before work is done.9. Maintain all machine tools with care. Follow allmaintenance instructions for lubricating andthe changing of accessories. No attempt shallbe made to modify or have makeshift repairsdone to the machine. This not only voids thewarranty but also renders the machine unsafe.10. Machinery must be anchored to the floor.11. Secure work. Use clamps or a vise to holdwork, when practical. It is safer than using yourhands and it frees both hands to operate themachine.12. Never brush away chips while the machine isin operation.13. Keep work area clean. Cluttered areas inviteaccidents.