Jet JAT-660 Operations & Parts Manual

Contents

4 JAT-660,661 Screwdrivers20. Do not use power tools in damp or wetlocation, or expose them to rain. Keep workarea well lighted.21. Do not leave a connected tool unattended.When not in use, disconnect tool from airsource.22. Shut off air supply and discharge any residualpressure from tool before removing hose,making adjustments, changing accessories,or storing tool.23. Make sure tool is switched off, and your fingeroff the trigger, before connecting to air supply.24. Remove adjusting keys and wrenches beforeturning on tool.25. Keep visitors a safe distance from the workarea. Keep children away.26. Give your work undivided attention. Lookingaround, carrying on a conversation and“horse-play” are careless acts that can resultin serious injury.27. Do not force a tool or attachment to do a jobfor which it was not designed. The right toolwill do the job better and more safely.28. Repetitive motions and/or exposure toconstant vibration can be harmful to handsand arms. Take frequent breaks and relaxhands during extended operation. Changeposture to avoid discomfort or fatigue.29. Compressed air can be harmful if directedtoward sensitive areas of the body, and maypropel small particles caught in the air stream.Exercise proper caution.30. Use only recommended accessories;improper accessories may be hazardous.31. Maintain tools with care. Keep air tool cleanand oiled for best and safest performance.32. Do not use combustible gases, carbondioxide, oxygen or any bottled gas as an airsource for the tool. These can present risk ofexplosion and serious injury.33. Do not lubricate the tool with combustibleliquids, such as kerosene, diesel or jet fuel.34. Do not dispose of this tool with normalhousehold waste. Never dispose of the air toolinto fire.Specific warnings for Screwdrivers35. This pneumatic screwdriver is designed forinsertion and removal of screws and similarfasteners. If you are not familiar with theproper and safe operation of a pneumaticscrewdriver, do not use until proper trainingand knowledge have been obtained.36. Secure workpiece with clamps or vise; do nothold workpiece by hand.37. Only use accessories that are intended for usewith a pneumatic screwdriver, and whichmatch the chuck size of the tool.38. Screwdriver bits should be clean and in goodcondition.Familiarize yourself with the following safety notices used in this manual:This means that if precautions are not heeded, it may result in serious, or evenfatal, injury.This means that if precautions are not heeded, it may result in minor injury and/orpossible tool damage.