Jet JDP-15B-M Operating Instructions Manual

Also see for JDP-17: Operating instructions and parts manual

Contents

Fig 2Drift keyRing spannerColumn locking handleTable elevating crank3 down feed handlesWorm shaftAllen keysBolts and washers for base mount16mm keyless chuckMT2/ B16 arborChuck guardOperating manualSpare parts list.4.4 FeaturesRapid spindle travel with one revolution of the handleOne-handed belt tensioning allows for rapid speed changesIntegrated depth stop makes repetitive drilling quick and easyCross Laser easily identifies the drill centreLong-lasting, built-in LED work light reduces shadowsPrecisely ground cast iron work tableLarge table surface features twin T-slot grooves and 4 tableslots to accommodate any projectTable edge designed to make clamping easyMDF table insert, 95x95mm, height adjustable, easilyreplacedLarge cast iron base provides stabilityPowered by an efficient high torque induction motor and poly-V belt drive system16mm keyless chuck with MT2/B16 arbor suppliedTransparent chuck guard with limit switch, for safe operationPulley cover with limit switch, for safe operationE-stop button, for safe operation4.5 Description of machineFig 3A…Pulley coverB…Downfeed handleC…Downfeed lockD…LED work light and cross laserE…Column locking handleF…Table elevating crankG…RackH…ColumnI…..BaseJ….TableK….Table insert (MDF)L….Chuck guardM…Spindle quillN….Switches for work light and cross laserP….Motor ON/OFF switchQ….E-stop button5. Transport and start up5.1 Transport and installationThe machine is designed to operate in closed rooms andmust be placed stable on firm and levelled surface.Warning:To avoid tipping, the machine must be bolted down withtwo lag screws (not provided). Fig 4