Jet JMD-15 Owner's Manual

Also see for JMD-15: Operator's manual Owner's manual Operating instructions and parts manual

Contents

4Specifications JMD-15/18/18PFNJMD-15 JMD-18 JMD-18PFNStock No. 350017 350018 350020Drilling Capacity 1” 1-1/4” 1-1/4”Face Mill Capacity 2-1/2” 3” 3”End Mill Capacity 1/2” 3/4” 3/4"Swing 19-3/8” 20-1/16” 20-1/16”Maximum Distance Spindle toTable 15” 18” 26”Spindle Taper R-8 R-8 R-8Spindle Travel 3-1/2” 5” 5”Quill Diameter 2-1/2” 3” 3”Head Swivel 360° 360° 360°Column Diameter 3-5/8” 4-1/2” 4-1/2”Number of Power Downfeeds ---- ---- 3Range of Power Downfeeds ---- ---- 0.0047”, 0.007”, 0.001”Number of Spindle Speeds 12 12 12Range of Spindle Speeds 110-2,580 RPM 150-3,000 RPM 150-3,000 RPMMaximum Table Travel 14” 20-1/2” 20-1/2”Cross Travel 6” 7” 7”Working Surface of Table 7-1/2” x 23” 9-1/2” x 31-3/4” 9-1/2” x 31-3/4”Number of T-Slots 4 4 4T-Slot Size 9/16” 5/8” 5/8”T-Slot Centers 1-1/2” 2-1/8” 2-1/8”Overall Dimensions 36-1/2”L x 37-1/2”W x35-1/2”H42-1/2”L x 39-3/4”W x43-1/2”H42-1/2”L x 39-3/4”W x51-1/2”HBase Dimensions 12-1/2” x 19-3/4” 15-3/4” x 23-3/4” 15-3/4” x 23-3/4”Motor (UL listed) 1HP, 1PH, 115/230V(prewired 115V), 60Hz2HP, 1PH, 230V only,60Hz2HP, 1PH, 230V only,60HzNet Weight (approx.) 440 lbs. 660 lbs. 700 lbs.Shipping Weight (approx.) 540 lbs. 760 lbs. 800 lbs.The specifications in this manual are given as general information and are not binding. Walter Meier(Manufacturing) Inc., reserves the right to effect, at any time and without prior notice, changes oralterations to parts, fittings, and accessory equipment deemed necessary for any reason whatsoever.