Contents - IMPORTANT SAFETY INSTRUCTIONS
- Switch lock-out
- Table Of Contents
- About this manual
- Specifications
- Mounting hole centers
- Setup and assembly
- Lubrication
- Voltage conversion
- Table adjustments
- Operation
- Manual coarse feed
- Troubleshooting JMD-40GH/45GH series Mill-Drills
- Optional accessories
- JMD-40GH,-40GHPF Table, Base, and Column Assembly – Exploded View
- JMD-40GH,-40GHPF Table, Base, and Column Assembly – Parts List
- JMD-40GH,-45GH (non-powerfeed) Gear Head Assembly – Exploded View
- JMD-40GH,-45GH (non-powerfeed) Gear Head Assembly – Parts List
- JMD-40GH,-45GH (non-powerfeed) Gears Assembly – Exploded View
- JMD-40GH,-45GH (non-powerfeed) Gears Assembly – Parts List
- JMD-40GHPF,-45GHPF (powerfeed) Gear Head Assembly – Exploded View
- JMD-40GHPF,-45GHPF (powerfeed) Gear Head Assembly – Parts List
- JMD-40GHPF,-45GHPF (powerfeed) Gears Assembly- Exploded View
- JMD-40GHPF,-45GHPF (powerfeed) Gears Assembly – Parts List
- JMD-45GH,-45GHPF Table and Base Assembly – Exploded View
- JMD-45GH,-45GHPF Table and Base Assembly – Parts List
- JMD-45GH,-45GHPF Square Column Assembly – Exploded View
- JMD-45GH,-45GHPF Square Column Assembly – Parts List
- Electrical Connections, JMD-40GH/45GH series
- Wiring Diagram 230V
- Warranty and service
| 
7JMD-40GH JMD-40GHPF JMD-45GH JMD-45GHPFOverall assembled (LxWxH) 28 x 39-1/4 x 42-1/2 in.(709 x 995 x 1079 mm)29 x 36 x 50 in.(736 x 914 x 1270 mm)Shipping dimensions (LxWxH) 29-3/4 x 37-1/2 x 49 in.(755 x 950 x 1242 mm)36 x 30 x 52 in.(915 x 763 x 1320 mm)WeightsNet weight 628 lb (285 kg) 655 lb (297 kg) 728 lb (330 kg) 754 lb (342 kg)Shipping weight 694 lb (315 kg) 721 lb (327 kg) 794 lb (360 kg) 820 lb (372 kg)1 subject to local and national electrical codes.2 The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplaceconditions vary, this information is intended to allow the user to make a better estimation of the hazards and risksinvolved only.L = length, W = width, H = height, D = depthn/a = not applicableThe specifications in this manual were current at time of publication, but because of our policy of continuousimprovement, JET reserves the right to change specifications at any time and without prior notice, without incurringobligations.4.1 Mounting hole centersJMD-40 series JMD-45 seriesFigure 4-1 |
