Jet JWBS-20 Operating Instructions And Parts Manual

Also see for JWBS-20: Operating instructions and parts manual Operating instructions Operating instructions Owner's manual

Jet JWBS-20 Operating Instructions And Parts Manual Manual pdf 5 page image

5blahblahblah20. Make your workshop child proof with padlocks, master switches or by removing starter keys.21. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” arecareless acts that can result in serious injury.22. Adjust and position upper and lower blade guides before starting to cut. Upper blade guide should beadjusted to approximately 1/8” above material to be cut.23. Adjust blade tension and tracking before starting to cut.24. Saw teeth must point down toward table.25. Maintain a balanced stance at all times so that you do not fall or lean against the blade or othermoving parts. Do not overreach or use excessive force to perform any machine operation. Keephands and fingers away from the blade while the machine is running.26. Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job forwhich it was not designed. The right tool will do the job better and safer.27. Use recommended accessories; improper accessories may be hazardous.28. Maintain tools with care. Keep blades sharp and clean for the best and safest performance. Followinstructions for lubricating and changing accessories.29. Hold material firmly against the table and fence.30. Stop the machine and wait for blade to stop moving before removing scrap material from the table.31. Turn off the machine and disconnect from power before cleaning. Use a brush or compressed air toremove chips or debris — do not use your hands.32. Do not stand on the machine. Serious injury could occur if the machine tips over.33. Never leave the machine running unattended. Turn the power off and do not leave the machine until itcomes to a complete stop.34. Remove loose items and unnecessary work pieces from the area before starting the machine.Familiarize yourself with the following safety notices used in this manual:This means that if precautions are not heeded, it may result in minor injury and/orpossible machine damage.This means that if precautions are not heeded, it may result in serious injury or possiblyeven death.- - SAVE THESE INSTRUCTIONS - -