12 - EnglishShort instructions1 Drawing barTransport unit over even surfaces2 Hanger for high-pressure hoseWinding up the high-pressure hose3 Transport handleTransport the unit over stairs/obstacles4 Master switchSwitch on unit – ISwitch off unit – 05 Water connectionConnect supply hose6 High pressure outletConnect high-pressure hose7 Spray lanceRegulate pressure8 HandgunSwitch on – press safety button and pull leverSwitch off – release lever9 Power cord with power plug10 Cleaning agent containerDraw in and meter cleaning agent (+/–)Safety NotesBefore first use of the unit read these operatinginstructions and act in accordance with them.Keep these operating instructions in a safe placefor later use or for a subsequent owner.Use of the unit as authorizedUse this unit exclusively for non-industrialpurposes– for cleaning machines, vehicles, buildings,tools, facades, terraces, garden implements,etc., with high-pressure water jet (if necessarywith the addition of cleaning agents).– for cleaning vehicle engines only in locationsequipped with an appropriate oil separator.– with accessories, replacement parts andcleaning agents authorized by Kärcher.Please comply with instructions supplied withthe cleaning agents.General safety notesNever permit children and adolescentsto handle the unit.Never leave the unit unattended whilst themaster switch is switched on.Never operate the unit in potentially explosivespaces.Do not spray any objects which contain health-endangering substances (e.g. asbestos).AssemblyWhen unpacking check the contents. Informyour dealer of any damage in transportation.Assembly of the unit is demonstrated withpictures on page 60/61 “Step by Step”.