Kärcher CV 300 Operating Instructions Manual

Also see for 1.012-059.0: Operating instructions Operating instructions

Contents

Kärcher CV 300 Operating Instructions Manual Manual pdf 10 page image

ASSEMBLY/OPERATION86322070 CV 02/03/093-3ASSEMBLYPlease read all instructions beforeusing this machine.1. Carefully attach the brush nozzle to the vacuumcleaner through the fitting at the bottom of thevacuum until it locks. [See below]2. Push the black end of the hose [A] into theconnection on the filter cover [B].3. Insert the hose handle [C] into the suction openingon the side and press the hose into its place on theside of the machine, as shown.OPERATIONYour vacuum is operated with an electric power brush. Themachine can be used in the upright position.When locking the vacuum in theupright position, please ensure thebag housing is clicked in place, face forward to the centeror the unit could overturn.Please ensure that the On/Off switch is in the OFFposition. Turn the cable hook to release the power cableand plug into the walls main outlet.Now you may start your machine by moving the powerswitch to the ON position.To use the power head (12” or 15” model):1. Press the foot pedal [D] on the rear of the powerhead and lower the machine handle to an angledposition. The brush motor will then turn on.When using the hose andattachments, keep the machine inupright position.The hose handle can be removed fromthe side of the vacuum and can be usedwith or without attachments. Alsomaintain a grasp on the machine whenusing the hose as it could tip if the hoseis pulled too far.The machine can also be used withoutthe power head. You can easily carrythe machine by using the carryinghandle.When you have finished using themachine, turn it off by moving the powerswitch to the OFF position. Then unplugthe power cable and wind it into thecable hook and handle.! CAUTION! CAUTION! CAUTIONHandleHoseHandleCarryingHandle