Kärcher CV 36/2 Manual

Contents

English 11NoteWe recommend that you use our microfilterattachment set along with the paper bag(see special accessories). BIA category C,separation level safety greater than 99.9%.This can help in sucking even extremely finedust particles that can be harmful to health.The microfilter should be replaced when thesuction performance is poor despite chang-ing the paper bag.Î Remove both the screws located on thesides of the upper part of the vacuumcleaner.Î Insert the upper part of the vacuumcleaner in a vertical position on to thebrush head.Î Insert both the aluminium profiles intothe recesses provided at the upper partof the vacuum cleaner and fasten themwith the screws.Î Connect the connecting hose to thebrush head and the upper part of thevacuum cleaner.Î Insert the connection chord with plug intothe socket at the upper part of the vacu-um cleaner (you must be able to hear theplug locking in).Î Wind the mains cable of the appliancebetween the upper and lower cable hold-er.Î Remove the entire mains cable by turn-ing the lower cable holder. WarningRisk of damage! Do not move the applianceover the mains cable when the brushes arerotating. Carry the appliance over the stepsand high thresholds.The brush head is equipped with a hingedlock that stops the appliance in the verticalresting position.Î To resume working, step on the lockingpedal and tilt the appliance backwards.Start upConnecting the upper part of thevacuum cleaner with the brush headOperationsStoring and removing the cableWorking/ resting position