Kärcher G 2600 FCE Operator's Manual

Contents

English 5ASSEMBLY INSTRUCTIONSCAUTIONWhen connecting to water supply mains, localregulations of your municipal water companymust be observed. In some areas connectingdirectly to public drinking water supply mayrequire a backfl ow prevention device. This isto ensure that there is no feedback of chemi-cals into the water supply. Use a water filter toavoid potential damage from dirt in the watersupply.■ Garden hose must be at least 5/8 inchdiameter.■ Flow rate of water supply must not fall below2.5 GPM (gallons per minute)WATER SUPPLY(Cold Water Only)Hardware (included)Description Purpose Illustration QtyA Knob 1/4" Joint Assembly 2B 1/4" X 1-1/2"BoltJoint Assembly 1C 1/4" X 2-1/2"BoltWand Holder Assembly 1D Wand Holder Wand Holder Assembly 1E Nozzle Holder Nozzle Holder Assembly 1F High PressureHoseSpray Gun Assembly 1■ Flow rate can be determined by running thewater for one minute into an empty 5-galloncontainer.■ The water supply temperature must not ex-ceed 104°F/40°C.■ Never use the pressure washer to draw inwater contaminated with solvents, e.g. paintthinners, gasoline, oil, etc.■ Always prevent debris from being drawn intothe unit by using a clean water source. Useadditional water fi lter.■ Do not operate pressure washer without thewater turned on.