– 6– For strong contaminations Set the working pressure and quantityby pulling hard on the handle on thehand spray gun. Once the desired wa-ter stream is reached, this handle posi-tion can be set via the hand wheel of thehand spray gun. Once you open it upagain, the water stream will be adjustedautomatically. Pull the lever on the handgun. Release the lever on the trigger gun. Turn the hand wheel on the hand spraygun to 0 to protect the lever from beingreleased inadvertently. Store the hand spray gun and spraypipe in the accessory mount. Turn the knurled nut of the detergent nozzlein a clockwise direction until it stops. Set the appliance switch to "I". Open the hand spray gun and rinse theappliance for at least 1 minute. Release the lever on the trigger gun. Set the appliance switch to "0". Shut off water supply. Activate hand spray gun until device ispressure less. Turn the hand wheel on the hand spraygun to 0 to protect the lever from beingreleased inadvertently. Remove the water inlet hose from theappliance. Pull out the mains plug. Stow away the mains cable, the high-pressure hose and accessory at the ap-pliance. CAUTIONRisk of personal injury or damage! Mind theweight of the appliance during transport. When transporting in vehicles, securethe appliance according to the guide-lines from slipping and tipping over. Release parking brake. Push the appliance. Connect the lifting device in the centerof the strut to load by crane. DANGERRisk of injury due to dropping device.– Check the strut for crane loading fordamage prior to each transport bycrane.– Only lift up the appliance by the strutwhen loading by crane.– Secure the lifting device against inad-vertent load release.– Remove the spray lance with the triggergun prior to transportation by crane.– The appliance must only be transportedby properly trained crane personnel.– Do stand below the load.– Ensure that no persons are present inthe immediate vicinity of the crane.– Do not leave the appliance on the craneunattended. CAUTIONRisk of personal injury or damage! Consid-er the weight of the appliance when storingit.ATTENTIONRisk of damage! Freezing water in the ap-pliance can destroy parts of the appliance.For longer work breaks or if a frost free stor-age is not possible: Drain water. Flush device with anti-freeze agent.Round jet nozzleSet working pressure and flow ratePressure/ quantity regulation at thehand spray gunInterrupting operationAfter each operationAfter operation with detergentFinish operationTransportDrivingTransport by craneStorageShutdown20 EN