Kärcher HD 18/50-4 Cage Classic EU User Manual

Contents

– 6The shoulder support (2.639-251.0) shouldbe used to prevent injuries and to makework easier at recoil pressures > 150 N.The appliance is equipped with the follow-ing nozzles:– Power nozzle, 15° spray angleHigh pressure flat stream (15°) for largeareas of contamination. The working pressure can be read fromthe manometer.Note:Always direct the high-pressure jet at theobject to be cleaned from a distance toavoid damage from high pressure. Release the lever on the trigger gun. Use the safety catch to secure thehandgun lever. Store the hand spray gun and spraypipe in the accessory mount.The working pressure can be changed byusing different high-pressure nozzles. Select a nozzle from the table above. Unscrew the union nut from the spraylance. Replace nozzle. Screw on and tighten the union nut.Note:This method of pressure adjustment al-ways means that the full flow rate of 1800 l/h is always available. Release the lever on the trigger gun. Set the appliance switch to "0". Shut off water supply. Activate hand spray gun until device ispressure less. Use the safety catch to secure thehandgun lever. Remove the water inlet hose from theappliance. Pull out the mains plug. Stow away the mains cable, the high-pressure hose and accessory at the ap-pliance. WARNINGRisk of damage! Freezing water in the ap-pliance can destroy parts of the appliance.Store the appliance in a heated room dur-ing winter or empty it. During longer breaksin operation, it is advisable to pump in anti-frost agents into the appliance. Screw off water supply hose and highpressure hose. Blow through machine with com-pressed air.Note:Observe handling instructions of the anti-freeze agent manufacturer. Pump in conventional frost protectionagents through the appliance.A certain corrosion protection is achievedwith this as well. CAUTIONRisk of personal injury or damage! Mind theweight of the appliance during transport. Pull the actuation lever of the parkingbrake all the way to the back.Power nozzleInterrupting operationChanging working pressurePressureMPa (bar)NozzlesizeOrder numberFlat jet nozzles50 (500) 15060 5.765-263.035 (350) 15075 2.113-073.025 (250) 15095 2.113-075.015 (150) 15120 2.113-077.0Detail nozzles50 (500) 060 5.765-264.035 (350) 075 2.113-074.025 (250) 095 2.113-076.015 (150) 120 2.113-078.0Finish operationFrost protectionDrain waterFlush device with anti-freeze agentTransportDriving20 EN