Kärcher HD 2.0/10 Ed Operator's Manual

Also see for 1.575-250.0: Operator's manual

Contents

#9.800-085.0 • Rev. 6/095PRESSURE WASHER OPERATOR’S MANUALCOMPONENT IDENTIfICATIONPump — Develops high pressure.Spray gun — Controls the application of water anddetergent onto cleaning surface with trigger device.Includes safety latch.Detergent Injector — Allows you to siphon and mixdetergents when used with a soap nozzle.Wand — Must be connected to the spray gun.Unloader — Safety device that relieves pressure whenspray gun trigger is closed.High Pressure Hose — Connect one end to waterpump discharge nipple and the other end to spraygun.Pump Protector — Cycles fresh cool water throughpump when recirculating water reaches 140°F.gfCI — Ground fault circuit interrupter trips whenvoltage leaks to ground.Note: If trigger on spray gun is released for morethan 2 minutes, water will leak from valve. Warm wa-ter will discharge from pump protector onto floor.This system prevents internal pump damage.Spray gunand WandHigh PressureHosePumpPressureNozzlegarden Hose(not included)UnloaderDetergentbucket (notincluded)Water Supply(not included)WandHangerquickCoupler On/OffSwitchgfCIPumpProtectorSoapNozzleSafetyLatchDetergentInjector