#9.800-085.0 • Rev. 01/08OPERATOR’S MANUAL PRESSURE WASHER14ITEM PART NO. DESCRIPTION qTy 9.803-833.0 Cover, Motor (51.0, 5.0, 53.0) 13 9.80-171.0 Nipple 3/8" x 3/8" NPT Male 14 9.80-146.0 Swivel, 1/" MP x 3/4" GHF, w/Strainer 15 9.80-18.0 Protector, Pump 1/" 140° 16 Unloader, See Specifications Page7 Pump, See Specifications Page8 9.80-695.0 Nut, 10/3" Keps (51.0, 5.0, 53.0) 49 9.80-514.0 Strain Relief (50.0) 19.80-55.0 ▲ Locknut, 1/" (50.0) 130 9.80-695.0 ▲ Nut, 10/3" Keps (51.0, 5.0, 53.0) 39.80-699.0 ▲ Screw, 10/3" x 3/4" Slot Pan, MS, SS (51.0, 5.0, 53.0) 19.800-040.0 ▲ Label, Ground (51.0, 5.0, 53.0) (50.0) 131 9.80-804.0 Washer, 5/16" Flat 83 Motor, See Specifications Page33 9.80-064.0 Grommet, Rubber, Nozzle Holder 534 9.80-778.0 Nut, 5/16" Flange, Whiz Loc 35 9.803-1.0 Handle, Grab, Chrome 136 9.800-06.0 Label 137 9.803-10.0 Plate, Warning/Instr. Black 138 9.803-098.0 Hanger, Hose/Wand 139 9.80-706.0 Bolt, Carriage, 1/4"-0 x 1-3/4" 640 9.80-80.0 Washer, 1/4" Flat 641 9.80-776.0 Nut, 5/16" ESNA, NC 44 9.803-119.0 Handle, Lower Grab, Chrome 143 9.803-114.0 Retainer Bracket, Handle, Black 44 9.80-78.0 Bolt, 3/8" x " 445 9.80-79.0 Bolt, 3/8" x -1/4" 46 9.80-817.0 Washer, 3/8" x 1" 47 9.80-066.0 Pad, Soft Rubber, 50 Duro 48 9.80-807.0 Washer, 3/8" SAE, Flat 1049 9.80-779.0 Nut, 3/8" ESNA, NC 650 9.80-783.0 Axle Hub Black 51 9.80-70.0 Wheel & Tire Assy., 4" Steel Rim w/Tube 5 9.80-103.0 Bushing, Snap, 5/8" 53 9.80-71.0 Bolt, Carriage 5/16" x 1-3/4" 454 9.803-097.0 Axle, 5/8" x 19.65" Long 155 9.80-804.0 Washer, 5/16" Flat, SAE 456 9.803-13.0 Handle, Bumper, Chrome 157 9.803-15.0 Base, CW Direct, Black 158 9.800-013.0 Label, Intended For Indoor Use 159 9.800-034.0 Label, Clear Lexan, -1/4” x 4-1/" 1ExPLODED vIEW PARTS LIST