Kärcher HD 2.8/20 Pb Operator's Manual

Also see for BG-252737: Operator's manual Manual

Contents

Kärcher HD 2.8/20 Pb Operator's Manual Manual pdf 6 page image

9.800-083.0 • Rev. 01/087PRESSURE WASHER OPERATOR’S MANUALSTeP 1: Attach the handle to theframe of the pressure washer. Note:It may be necessary to move thehandle supports from side to sidein order to align the handle so it willslide over the frame supports.STeP 2: Insert the carriage boltthrough the holes from the outsideof the unit and attach a nut fromthe inside of the machine. Tightennuts.STeP 3: Attach the spray gun/hosestorage handle, and bracket tohandle. Tighten nuts.STeP 4: Attach the high pressurehose to the spray gun using teflontape on hose threads.STeP 6: Release the coupler col-lar and push the nozzle and thecollar until the collar clicks or locks.Pull the nozzle to make sure it issecure.STeP 7: Connect high pressurehose to pump discharge fitting.Push coupler collar forward untilsecure.STeP 5: Pull the spring-loadedcollar of the wand coupler backto insert your choice of pressurenozzle.STeP 8: Connect garden hose to aclean cold water source and opensupply valve completely. NEVERuse hot water.ASSeMBly INSTrUCTIONSSTeP 9: Connect the garden hose to pump water inlet.Inspect inlet screen. CAUTION: Do not run the pumpwithout water or pump damage will result.AlignmentHolesHandleframeAssy.CarriageBoltNutStudsNutHose/Spray GunStorage BracketSafetylatchSprayGunHigh PressureHoseWandCouplerPressureNozzlePressureNozzle WandCouplerWandCollarPumpdischargefittingHigh Pressure Hose ColdWaterSourceGardenHosePumpWater InletGardenHoseCouplerCollarBoltsWasherInlet Screen