Kärcher HD 2.8/20 Pb Operator's Manual

Also see for HD 2.5/27 Pb: Operator's manual Operator's manual Operator's manual

Contents

Kärcher HD 2.8/20 Pb Operator's Manual Manual pdf 7 page image

9.800-083.0 • Rev. 04/10A7PRESSURE WASHER OPERATOR’S MANUALSTEP 1: Attach the handle to theframe of the pressure washer. Note:It may be necessary to move thehandle supports from side to sidein order to align the handle so it willslide over the frame supports.STEP 2: Insert the carriage boltthrough the holes from the outsideof the unit and attach a nut fromthe inside of the machine. Tightennuts.STEP 3: Attach the spray gun/hosestorage handle, and bracket tohandle. Tighten nuts.STEP 4: Attach the high pressurehose to the spray gun using tefl ontape on hose threads.STEP 6: Release the coupler col-lar and push the nozzle and thecollar until the collar clicks or locks.Pull the nozzle to make sure it issecure.STEP 7: Connect high pressurehose to pump discharge fitting.Push coupler collar forward untilsecure.STEP 5: Pull the spring-loadedcollar of the wand coupler backto insert your choice of pressurenozzle.STEP 8: Connect garden hose to aclean cold water source and opensupply valve completely. NEVERuse hot water.ASSEMBLY INSTRUCTIONSSTEP 9: Connect the garden hose to pump water inlet.Inspect inlet screen.CAUTION: Do not run the pumpwithout water or pump damage will result.AlignmentHolesHandleFrameAssy.CarriageBoltNutStudsNutHose/Spray GunStorage BracketSafetyLatchSprayGunHigh PressureHoseWandCouplerPressureNozzlePressureNozzle WandCouplerWandCollarPumpDischargeFittingHigh Pressure Hose ColdWaterSourceGardenHosePumpWater InletGardenHoseCouplerCollarBoltsWasherInlet Screen