Kärcher HD 3.0/30 Pb Operator's Manual

Also see for HD 3.0/30 Pb: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

Contents

Kärcher HD 3.0/30 Pb Operator's Manual Manual pdf 7 page image

9.807-623.0 • Rev. 10/157PRESSURE WASHER OPERATOR’S MANUALSTEP 1: Check engine oil level. Oil level should be level with the bottomof the oil fi ller neck. Be sure the machine is level when checking the oillevel. (Refer to the engine's operating manual included with machine.) Werecommend that the oil be changed after the first 5 hours of use, then onceevery 50 hours. Note: Improper oil levels will cause low oil sensor to shutoff engine. IMPORTANT! Do not run engine with high or low oil levelsas this will cause engine damage.STEP 2: Remove shipping cap andinstall oil dipstick. Check pump oillevel by using dipstick or observe oillevel in oil window (if equipped). Use30 wt. (non detergent) oil.STEP 5: Move the fuel shut-off valve to the "On" posi-tion. When the engine is not in use, leave the fuel valvein the "OFF" position.STEP 4: Trigger the spray gun toeliminate trapped air then wait for asteady fl ow of water to emerge fromthe spray nozzle.OPERATING INSTRUCTIONSSTEP 3: Fill gas tank with unleadedgasoline. Do not use leaded gaso-line.STEP 6: Move the choke lever to the "Choke" position(on a warm engine, leave the choke lever in the runposition). Move the choke lever to the "Closed" position.To restart a warm engine, leave the choke lever in the"Open" position.Engine OilDipstickPump OilDipstickOil WindowGasTankChokeLeverFuelValveChokeFuelValve