Kärcher HD 3.1 / 31 P Operator's Manual
             | |
13TROUBLESHOOTING –continued ! ( !7+• Loose fittings.- Tighten fittings.• Missing/worn rubber washer.- Insert new washer. !"-! !7+• Spray wand not properly attached.- Attach the wand to the spray gun.Turn the wand collar clockwise ontothe gun threads until tight.• Broken o-ring.- Call Kärcher customer service hotlineand order an o-ring.) "+• Pump is sucking air.- Check that hoses and fittings are airtight. Turn off machine andpurgepump by squeezing trigger gununtil a steady flow of water emergesthrough the nozzle.! !7; ) +• Loose fittings.- Check that all fittings are tight.• Water seals are damaged or worn.- Call customer service.• Thermal protection device isactivated.- Thermal protection device will autoreset. Do not run pump for more than5 minutes without spraying. +• Oil seals are damaged or worn.Call customer service. ! Kärcher Commercial USA |
Related manuals for Kärcher HD 3.1 / 31 P
Kärcher HD 3.1 Operator's Manual
Kärcher HD 2.3/24 P Operator's Manual
Kärcher HD 2.3/24 P Operator's Manual
Kärcher HD 2.3/24 P Operator's Manual
Kärcher HD PRO Operator's Manual
Kärcher HD 4.0/36 P Operator's Manual
Kärcher HD 3.0/30 Pb Operator's Manual
Kärcher HD 3.0/30 Pb Operator's Manual
Kärcher HD 2.3 CV Operator's Manual
Kärcher K 3 Operator's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine