Kärcher HD 6/13-4 M User Manual

Also see for HD 6/13-4 M: Manual

Contents

Kärcher HD 6/13-4 M User Manual Manual pdf 7 page image

English7Storing the cleaner Place the handgun in the support. Reel in the high-pressure hose and hang itover the hose rest.or Wind the high-pressure hose on to thehose reel. Push in the crank handle to lockthe hose drum. Wind the connection cable around the ca-ble holder. Fix the plug using the installed clip.Frost protectionCaution!Frost will destroy a unit that is not com-pletely empty of water! Store the unit where itwill be free of frost.If storage away from frost is not possible: Drain off the water and rinse the unitthrough with anti-freeze. Leave the unit to dry for max. 1 minute. Use the standard glycol-based anti-freezesfor cars. Follow the handling instructions of the anti-freeze manufacturer.Care and maintenanceDanger!Before any care and maintenance workon the unit draw out the mains plug.Caution!When changing the oil, dispose of anywaste oil only at authorised collection points.Safety inspection/MaintenancecontractYou can arrange with your dealer to have a reg-ular safety inspection carried out or to have amaintenance contract. Please seek advice.Before each use Check connecting cable for damage (risk ofgetting an electric shock), have a damagedconnecting cable replaced without delay byauthorised Customer Service personnel oran electrician. Check high-pressure hose for damage(danger of explosion), replace a damagedhigh-pressure hose without delay. Check unit (pump) for any leaks.Three drops per minute are allowable andcan appear on the underside of the unit.Seek the help of Customer Service if leaksare more serious.Every week Check oil level in oil reservoir: if the oil ismilky (water in oil), seek the help of Cus-tomer Service immediately. Clean the strainer in the water connection. Clean the filter at the suction hose for de-tergent.Annually or after 500 operatinghours Change the oil– For oil quantity and type see TechnicalSpecifications.– Undo the fastening screw, remove thehood, remove the oil tank cover, tilt unit.– Drain oil into a suitable container.– Fill slowly with fresh oil; air bubbles haveto escape.– Attach the oil tank cover.TroubleshootingDanger!Before any repair work is undertaken,switch the unit off and pull out the power plug.Have electrical components checked and re-paired only by authorised Customer Servicepersonnel.For faults which are not identified in this chap-!!