– 6ATTENTIONFrost will destroy the not completely waterdrained device.Store the appliance in a frost free area. Drain water. Pump in conventional frost protectionagents through the appliance.Note:Use normal glycol-based anti-freezingagents for automobiles.Observe handling instructions of the anti-freeze agent manufacturer. Operate device for max. 1 minute untilthe pump and conduits are empty.ATTENTIONProtect the trigger from damage duringtransport. CAUTIONRisk of personal injury or damage! Mind theweight of the appliance during transport. Insert the hand-spray gun in the holder. Reel the high-pressure hose onto thehose holder. Push the push handle down and pullour push the appliance using the pushhandle. When transporting in vehicles, securethe appliance according to the guide-lines from slipping and tipping over. CAUTIONRisk of personal injury or damage! Consid-er the weight of the appliance when storingit.This appliance must only be stored in inte-rior rooms.You can sign with your dealer a contract forregular safety inspection or even sign amaintenance contract. Please take adviceon this matter.Note: The maintenance plan given belowonly lists the maintenance tasks for thehigh-pressure pump. The maintenancetasks for the engine must also be done ac-cording to the details given in the operatinginstructions manual of the engine manufac-turer. DANGERRisk of injury if the machine is left runningin an unattended state.Switch off the motor and remove the sparkplug connector prior to performing any workon the appliance.Risk of burns! Do not touch hot mufflers,cylinders or radiator ribs. Check the high pressure hose for dam-ages (risk of bursting).Please arrange for the immediate ex-change of a damaged high-pressurehose. Check oil level Please contact Custom-er Service immediately if the oil is milky(water in oil). Clean water filter. Have the maintenance of the deviceperformed by the customer service. Change the oil in the high pressurepump.Frost protectionIf you cannot store it in a frost-freeplace:TransportStorageCare and maintenanceMaintenance intervalsDailyWeeklyEvery 500 operating hours, at leastannually18 EN