Kärcher HD 9/50-4 Cage Service Manual

14 English 5.906-441.0 Rev. 01 (06/10)Install the intermediate gear:Î Slide the toothed gear onto the shaft of the high pressurepump.Î Align the toothed wheel so that the shaft protrudes by 13±0,2mm from the toothed wheel.Î Coat the threaded pin with soluble screw protection and tightenit.1 Oil filling nozzle2 Spacer disc 7.0 mmÎ Fasten the intermediate gear to the combustion motor with 4spacer discs (7.0 mm) and 4 screws.The washers under the screw head are only required on theelongated borings. WarningRisk of damage. Use only spacer discs that are 7.00 mm long. Thespacer discs included in the package of the intermediate gear are6.0 mm long and must not be used.Î Fasten the intermediate gear to the high pressure pump using4 screws.Î Fasten the high pressure pump to the counter holder1 Oil level indicatorÎ Fill oil (SAE 90) into the oil fill neck while the appliance is in ahorizontal position until the oil level reaches the upper edge ofthe oil level indicator.4.5.7 Intermediate gear