Kärcher HDS 1.7/12 U Ed Operating Instructions Manual

Also see for HDS 1.7/12 U Ed: Manual

Contents

Kärcher HDS 1.7/12 U Ed Operating Instructions Manual Manual pdf 12 page image

– 7CautionRisk of injury and damage! Note the weightof the appliance in case of storage. DangerRisk of injury! Risk of tipping with high in-clines, if the inclination is too large to theside and with unstable surfaces.– The appliance should only be used ongradients of max. 2%.– Only use the machine on sound surfac-es.CautionRisk of injury and damage! Observe theweight of the appliance when you transportit. Lay the appliance on its rear prior totransporting it and drain the residualwater. Pull the device behind you at the carry-ing handle for transporting it over longerdistances To carry, hold the appliance by the han-dles and the pushing handle. When transporting in vehicles, securethe appliance according to the guide-lines from slipping and tipping over. DangerRisk of injury by inadvertent startup of ap-pliance and electrical shock.First pull out the plug from the mains beforecarrying out any tasks on the machine. Set the appliance switch to "0/OFF“. Shut off water supply. Turn on pump shortly (appr. 5 seconds)with device switch. Set the appliance switch to "0/OFF“. Activate hand spray gun until device ispressure less. Pull main plug out of socket with dryhands only. Remove water connection. Lock the trigger gun. Allow device to cool down.You can sign with your dealer a contract forregular safety inspection or even sign amaintenance contract. Please take adviceon this matter. Clean filter in the water connection. Clean filter at the detergent suck hose. Remove the filter. Clean filter in water and reinstall. Clean filter in water and reinstall. DangerRisk of injury by inadvertent startup of ap-pliance and electrical shock.First pull out the plug from the mains beforecarrying out any tasks on the machine.If malfunction can not be fixed, the de-vice must be checked by customer serv-ice.– No power Check power connection/conduit.– Engine overload/overheat Set the appliance switch to "0/OFF“. Allow device to cool down. Turn on the appliance. If malfunction still occurs, have devicechecked by customer service.– The exhaust temperature limiter hasbeen triggered, heating coil is sooted.StorageTransportMaintenance and careSafety inspection/ maintenancecontractMaintenance intervalsWeeklyMonthlyMaintenance WorksClean filter in the water connection.Clean filter at the detergent suck hoseTroubleshootingAppliance is not running12 EN