Kärcher HDS 3.5/23-4M Eg Operating Instructions Manual

Also see for HDS 3.5/23-4M Eg: Manual Manual

Contents

– 3– Please follow the national rules andregulations for fuel spray jets of the re-spective country.– Please follow the national rules andregulations for accident prevention ofthe respective country. Fuel spray jetsmust be tested regularly and the resultsof these tests must be documented inwriting.– The heating appliance of the machine isan ignition plant. All national laws andregulations about heating systems mustalso be followed.– As per the applicable national guide-lines, the first time this high-pressurecleaner must be taken into operation bya skilled person. KÄRCHER has al-ready performed this initial start-up foryou and has documented it accordingly.The documentation can be requested atyour KÄRCHER partner. Please havethe part and plant number of the appli-ance available when enquiring aboutthe documentation.– We would like to point out that the appli-ance must be repeatedly checked by askilled person as prescribed by the ap-plicable national regulations. Pleasecontact your KÄRCHER partner.Safety devices serve for the protection ofthe user and must not be put out of opera-tion or bypassed with respect to their func-tion.– While reducing the water supply at thepump head or with the Servopress -regulation the overflow valve opens andpart of the water flows back to the pumpsuck side.– If the hand-spray gun is closed, so thatthe whole water flows back to the pumpsuck side, the pressure switch at theoverflow valve shuts down the pump.– If the hand spray gun is opened, thepressure switch on the cylinder headturns the pump back on.The overflow valve is set by the manufac-turer and sealed. Setting only by customerservice.– The safety valve opens, when the over-flow valve resp. the pressure switch isbroken.The safety valve is set by the manufacturerand sealed. Setting only by customer serv-ice.– The water shortage safeguard preventsthe burner to be turned on when there iswater shortage.– A sieve prevents the contamination ofthe safeguard and must be cleaned reg-ulary.– The temperature stop switches off themachine when the waste gases havereached very high temperatures. WarningRisk of injury! Device, tubes, high pressurehose and connections must be in faultlesscondition. Otherwise, the appliance mustnot be used. Lock parking brake.Figure 3CautionHook the electric supply line into the cableguide of the right handle bow. Ensure thatthe cable is not damaged.Note: To protect the device, the burner isswitched off 5 hours after the system carecontainer is empty.Safety DevicesOverflow valve with two pressureswitchesSafety valveWater shortage safeguardTemperature stop for exhaust gasesStart upInstalling the handleRefill system care10 EN