Kärcher HDS 5/12 C Instructions Manual

Also see for HDS 5/12 C: User manual Original instructions Manual

Contents

Kärcher HDS 5/12 C Instructions Manual Manual pdf 19 page image

– 3Cleaning of: Machines, Vehicles, Struc-tures, Tools, Facades, Terraces, Garden-ing tools, etc. DangerRisk of injury! Follow the respective safetyregulations when operating at gas stationsor other dangerous areas.– Please follow the national rules andregulations for fuel spray jets of the re-spective country.– Please follow the national rules andregulations for accident prevention ofthe respective country. Fuel spray jetsmust be tested regularly and the resultsof these tests must be documented inwriting.– The heating appliance of the machine isan ignition plant. All national laws andregulations about heating systems mustalso be followed.Safety devices serve for the protection ofthe user and must not be put out of opera-tion or bypassed with respect to their func-tion.– The pressure switch turns the device offwhen the handgun is closed and switchon when the handgun is opened.– The safety valve opens, when the over-flow valve resp. the pressure switch isbroken.The safety valve is set by the manufacturerand sealed. Setting only by customer ser-vice.– The water shortage safeguard preventsthe burner to be turned on when there iswater shortage.– A sieve prevents the contamination ofthe safeguard and must be cleaned reg-ulary.– The temperature stop switches off themachine when the waste gases havereached very high temperatures. WarningRisk of injury! Device, tubes, high pressurehose and connections must be in faultlesscondition. Otherwise, the appliance mustnot be used. Lock parking brake.Figure 3Screw tightening torque: 6.5-7.0 NmFigure 4 Hook the tool bag onto the top tabs onthe appliance. Tilt the tool bag down and lock it intoplace. Fasten the tool bag with 2 screws(torque: 6.5 - 7.0 Nm).Proper usePlease do not let mineral oil contaminatedwaste water reach soil, water or the sew-age system. Perform engine cleaning andbottom cleaning therefore only on speci-fied places with an oil trap.Safety instructionsSafety DevicesPressure switchSafety valveWater shortage safeguardTemperature stop for exhaust gasesStart upInstalling the handleInstall the tool bag19EN