Kärcher HDS 7/9-4 M/MX Instructions Manual

Also see for HD 7/12-4 M: Manual Operating instructions Original instructions Manual Manual

Contents

Kärcher HDS 7/9-4 M/MX Instructions Manual Manual pdf 34 page image

– 10Note: Observe handling instructions of theanti-freeze agent manufacturer. Fill anti-freeze agent of the trade intoswimmer container. Switch on appliance (without heater) tillthe appliance has been completelyrinsed.A certain corrosion protection is achievedwith this as well.CautionRisk of injury and damage! Note the weightof the appliance in case of storage.Figure 11CautionRisk of damage! When loading the appli-ance with a forklift, observe the illustration.CautionRisk of injury and damage! Observe theweight of the appliance when you transportit. When transporting in vehicles, securethe appliance according to the guide-lines from slipping and tipping over. DangerRisk of injury by inadvertent startup of ap-pliance and electrical shock.First pull out the plug from the mains beforecarrying out any tasks on the machine. Set the appliance switch to "0/OFF“. Shut off water supply. Open the hand spray gun. Turn on pump shortly (appr. 5 seconds)with device switch. Pull main plug out of socket with dryhands only. Remove water connection. Activate hand spray gun until device ispressure less. Lock the trigger gun. Allow device to cool down.Your Kärcher vender will inform youabout the performance of a periodicsafety inspection resp. signing of amaintenance contract. Clean the sieve in the water connection. Clean the fine filter. Check oil level.CautionIn case of lacteous oil inform Kärcher cus-tomer service immediately Clean sieve in the water shortage safeguard. Clean filter at the detergent suck hose. Oil change. Perform the pressure test as per manu-facturer's instructions. Take out sieve. Clean sieve in water and reinstall. Unpressurize the appliance. Unscrew the fine filter from the pumphead. Remove the fine filter and the filter in-sert. Clean the filter with clean water or com-pressed air. Reinstall in reverse sequence.Flush device with anti-freeze agentStorageTransportMaintenance and careMaintenance intervalsWeeklyMonthlyAfter 500 operating hours, at least annu-allyAt least every 5 years, recurringMaintenance WorksClean the sieve in the water connectionCleaning the fine filter34 EN