Kärcher K 2.16 Operator's Manual

Also see for K 2.16: Operating instructions

6 EnglishÎ STEP 1:Connect the high pressure hose tothe unit’s high pressure outlet.Î STEP 2:Insert the spray wand of your choiceinto the trigger gun. Press in againstthe spring tension and twist intolocked position.Î STEP 3:Connect garden hose to unit’s waterinlet.Î STEP 4:Connect garden hose to the cold wa-ter source and turn water on com-pletely.Î STEP 5:Plug the Ground Fault Circuit Inter-rupter (GFCI) into a working outlet.– Press “RESET” button.– Press “TEST” button.Red indicator on “RESET” buttonshould appear.– Press “RESET” button again for use. WARNINGDo not use if above test fails.Note: The actual appearance of the GFCI maybe different from this illustration.Î STEP 6:Unlock the trigger gun safety lock.Trigger the gun to eliminate trappedair, wait for a steady flow of water toemerge from the spray nozzle.Î STEP 7:Turn on the high pressure washer (I).The motor starts only if the triggerof the gun is pulled and shuts offwhen the trigger is released.OPERATING INSTRUCTIONS