Kärcher K 2.89 M Operator's Manual

Also see for K 2.110 M: Operating instructions Operating instructions Operating instructions Operator's manual Operating instructions

Contents

4Water Supply (Cold Water Only)• Water hose must be at least 3/4 inch indiameter.• Flow rate of water supply must not fallbelow 2.5 GPM (gallons per minute).• Flow rate can be determined by runningthe water for one minute into an empty5-gallon container.IMPORTANT PRECAUTIONS – continued• The water supply temperature must notexceed 104°F/40°C.• Never use the pressure washer to draw inwater contaminated with solvents, e.g.paint thinners, gasoline, oil, etc.• Always prevent debris from being drawninto the unit by using a clean water source.ASSEMBLY INSTRUCTIONSStep 1Assemble the mobileadaptor by aligningthe four holes to themachine. Tighteneach of the four shortscrews provided.Step 4Assemble the handleby aligning the holesto the handle posts.Insert two of the longscrews and tighten.Step 2Slide the two handleposts into the mobileadaptor and line upthe holes. Insert twoof the long screwsand tighten.Step 3Insert wheels into sideholes of the mobileadaptor and snap intoplace.Step 6Place the filter end ofdetergent suction tubeinto the detergentcontainer.Step 5Assemble thedetergent container.Step 7Pull out the locking slidefrom the right side of thetrigger gun handle.Insert the small end ofthe high pressure hoseinto place.Push the locking slideback into the trigger gunto lock the hose inposition.