Kärcher K 2 Operating Instructions Manual

Also see for K 2: User manual Manual Manual Manual Manual

Contents

12 EnglishYou can rectify minor faults yourself with the help of thefollowing overview.If in doubt, please consult the authorized customer ser-vice. DANGERRisk of electric shock. Prior to all work on the appliance, switch off the ap-pliance and pull the power plug. Pull on the lever of the trigger gun; the device willswitch on. Check whether the voltage indicated on the typeplate corresponds to the voltage of the mains supply. Check the mains connection cable for damages. Appliance ventilation: Switch the appliance on withthe high-pressure hose detached and operate(max. 2 minutes) until the water exits the high-pres-sure connection without bubbles. Switch off appli-ance and reconnect high-pressure hose. Check the water supply. Pull out the sieve in the water connection using flat-nose pliers and clean under running water. Clean high-pressure nozzle: Remove dirt and de-bris from the nozzle bore, using a needle and rinsethrough with water from the front. Check water flow quantity. Slight leakage from the appliance pump is normal.If the leakage increases contact the authorizedcustomer service. Detach spray lance from the trigger gun. Work onlywith the trigger gun. Clean the detergent suction hose filter. Check the detergent suction hose for kinks.The warranty terms published by the relevant salescompany are applicable in each country. We will repairpotential failures of your appliance within the warrantyperiod free of charge, provided that such failure iscaused by faulty material or defects in manufacturing. Inthe event of a warranty claim please contact your dealeror the nearest authorized Customer Service centre.Please submit the proof of purchase.Addresses can be found under:www.kaercher.com/dealersearchTroubleshootingAppliance is not runningPressure does not build up in the applianceStrong pressure fluctuationsAppliance is leakingNo detergent infeedWarranty