– 8 Release the lever on the trigger gun. IllustrationLock the lever on the trigger gun. During longer breaks (more than 5 min-utes), also turn the appliance off usingthe "0/OFF" switch.CautionOnly separate the high-pressure hose fromthe trigger gun or the appliance while thereis no pressure in the system. After working with detergent, suspenddetergent suction hose in a containerfilled with clear water, switch the appli-ance on for around 1 minute once thespray lance has been removed andrinse until water runs clear. Release the lever on the trigger gun. Turn off the appliance "0/OFF". Turn off tap. Press the lever on the trigger gun to re-lease any remaining pressure in thesystem. Detach the appliance from the watersupply.Caution: When disconnecting the sup-ply or high pressure hose, warm watermay leak from the connections after op-eration. Lock the lever on the trigger gun. Pull out the mains plug.CautionIn order to prevent accidents or injuries,keep in mind the weight of the applianceduring transport (see Specifications).Illustration Lift appliance by the carrying handleand carry it.Illustration Pull the appliance by its transport handle. Secure the appliance against shiftingand tipping over.CautionIn order to prevent accidents or injuries,keep in mind the weight of the appliancewhen selecting a storage location for it (seeSpecifications). Park the machine on an even surface. Press the disconnect on the hand spraygun and remove the high pressure hosefrom the hand spray gun. Push the casing of the quick couplingfor the high pressure hose toward therear and disconnect the high pressurehose from the appliance.Illustration Stow away the mains cable, the high-pressure hose and accessory at the ap-pliance.Prior to extended storage periods, as dur-ing the winter, also observe the instructionsin the Care section.Interrupting operationFinish operationTransportWhen transporting by handWhen transporting in vehiclesStorageStoring the Appliance16 EN