Kärcher K 3.500 Manual
Also see for K 3.500: ManualOperating instructionsOriginal instructions
                                                                                                                                                                                                                                                | |
– 10 DangerTurn off the appliance and remove themains plug prior to any care and mainte-nance work.Prior to longer periods of storage, e.g. inthe winter: Remove filter from suction hose for de-tergent and clean under running water. Pull out the sieve in the water connec-tion using flat-nose pliers and clean un-der running water.The appliance is maintenance-free.Use only original KÄRCHER spare parts.You will find a list of spare parts at the endof these operating instructions.You can rectify minor faults yourself withthe help of the following overview.If in doubt, please consult the authorizedcustomer service. DangerTurn off the appliance and remove themains plug prior to any care and mainte-nance work.Repair works may only be performed by theauthorized customer service. Pull on the lever of the trigger gun; thedevice will switch on. Check whether the voltage indicated onthe type plate corresponds to the volt-age of the mains supply. Check the mains connection cable fordamages. Check setting at the spray lance. Appliance ventilation: Switch the appli-ance on with the high-pressure hosedetached and operate (max. 2 minutes)until the water exits the high-pressureconnection without bubbles. Switch offappliance and reconnect high-pressurehose. Check the water supply. Pull out the sieve in the water connec-tion using flat-nose pliers and clean un-der running water.Cause: Voltage reduction due to weakmains supply or when using an extensioncable. When switching on, first pull the lever ofthe trigger gun and then switch the ap-pliance switch to "I/ON". Clean high-pressure nozzle: Removedirt and debris from the nozzle bore, us-ing a needle and rinse through with wa-ter from the front. Check water flow quantity. Slight leakage from the appliance pumpis normal. If the leakage increases con-tact the authorized customer service. Use spray lance with pressure regula-tion (Vario Power).Turn the spray lance to "Mix" position. Clean the detergent suction hose filter. Check the detergent suction hose forkinks.Maintenance and careCareMaintenanceSpare partsTroubleshootingAppliance is not runningPressure does not build up in theapplianceAppliance does not start, motor humsStrong pressure fluctuationsAppliance is leakingNo detergent infeed19EN |
Related manuals for Kärcher K 3.500
manualsdatabase
Your AI-powered manual search engine