10 Englishacids and solvents as they are aggres-sive towards the materials from whichthe appliance is made. Warning! Unsuitable extension cables can be haz-ardous. Only use extension cables out-doors which have been approved for thispurpose and labelled with a sufficient ca-ble cross section:1 -10 m: 1.5 mm210 - 30 m: 2.5 mm2! Check the high-pressure hose for dam-age before every use. Please arrange forthe immediate exchange of a damagedhigh-pressure hose.! High-pressure hoses, fixtures and cou-plings are important for the safety of theappliance. Only use high-pressure hos-es, fixtures and couplings recommendedby the manufacturer.! Cleaning operations which produce oilywaste water, e.g. engine washes, under-body washes, may only be carried outusing washing stations equipped with anoil separator.Note! The appliance must not be operated bychildren or persons who have not beeninstructed accordingly.! The operator must use the applianceproperly. When working with the appli-ance, he must consider the local condi-tions and pay due care and attention toother persons, in particular children, whoare nearby.! Observe a distance of at least 30 cmwhen using the jet to clean painted sur-faces to avoid damaging paintwork.! Wear protective clothing and safety gog-gles to protect against back spray con-taining water or dirt.! Never leave the appliance unattendedwhen it is in operation.! This appliance was designed to be usedwith detergents which are supplied orrecommended by the manufacturer. Theuse of other detergents or chemicalsmay compromise the safety of the appli-ance.! Make sure that the power cable or exten-sion cables are not damaged by runningover, pinching, dragging or similar. Pro-tect the power cable from heat, oil, andsharp edges.! The connection between the power ca-ble and extension cable must not lie inwater.! All current-conducting parts in the work-ing area must be protected against jetwater.! The appliance may only be connected toan electrical supply which has been in-stalled in accordance with IEC 60364.! The appliance may only be connected toalternating current. The voltage mustcorrespond with the type plate on the ap-pliance.! The minimum fuse rating required at thesocket outlet is 10 A (slow-blow).! To avoid accidents due to electricalfaults we recommend the use of socketswith a line-side current-limiting circuitbreaker (max. 30 mA nominal trippingcurrent).! The plug and coupling of the extensioncable used must be watertight.! Always fully unroll electrical cables fromthe cable drum.Safety devices prevent injury and may notbe modified or bypassed.The switch prevents unintended starting ofthe appliance. Stop the appliance duringbreaks or after operation.The safety catch on the handgun preventsthe appliance from being switched on unin-tentionally.Safety DevicesUnit switchSafety catch