Operating instructions KM 100/100 R / KM 100/100 R P English25Battery dischargingwarningGreenBattery is chargedYellowBattery is almost dead! Stop sweeping and chargebatteryRedBattery flat— Sweeping system switched off bycontrol! Charge the batterysee chapter on "Maintenance"Flashing red— Discharge limit reached— 3 more min. driving possible,then the sweeper turns itself off! Then the sweeper cannot berestarted any more, the batterymust be recharged for at least3 hoursDecommissioningPlease heed the following ifsweeper is not to be used for alengthy period:! Stand sweeper on a flat surface! Turn key switch to "0" andremove key! Safeguard the sweeping machinefrom rolling away! Clean inside and outside ofsweeper! Turn off the machine on aprotected and dry place! Charge the battery and rechargeit at intervals of approx. every twomonthsTransportTransport instructions! Turn key switch to "0" andremove key! Secure the machine with wedgeson the wheels! Secure the machine with stretchbelts or ropesFastening areasNotes:Observe markings for fasteningareas on base frame! (chainsymbols)For loading or unloading themachine may be operated on slopesof only up to a max. of 18 %Cleaning and maintenance! Stand sweeper on a flat surface! Turn key switch to "0" andremove keyInternal cleaningDanger!Wear dust mask!Wear safety goggles!! Open unit cover, engage stay bar! Clean with a ragNote:The filter cartridge can be cleanedwith water.Prior to re-inserting it the filter mustbe completely dried.External cleaningClean with a damp cloth previouslysoaked in mild sudsNote:Do not use any aggressive cleaningagents!Maintenance intervalsElapsed-time meterElapsed-time meter indicatesmaintenance interval times.Maintenance by thecustomerDaily maintenance! Check the tyre air pressure! Check roller and side brush forwear and trapped straps! Check the function of alloperating controlsMaintenance weekly! Checking the battery acid level! Check freedom of movement ofBowden cables and moving parts! Check setting and wear ofsealing strips in sweeping area! Checking the vacuum systemMaintenance every 100 operatinghours! Check operation of seat contactswitch! Check tightness, wear andoperation of drive belts (V-beltsand round belts)Maintenance according to degreeof wear! Replace sealing strips! Replacing the sweep roller! Replacing the side broomSee maintenance tasks chapter fordescriptionNote:All service and maintenance workmust be performed by qualified andskilled personnel.A Kärcher specialist dealer can beconsulted whenever support isnecessary.