Kärcher NT 35/1 AP Te Service Manual

Also see for NT 25/1 Ap Te: Original instructions

Kärcher NT 35/1 AP Te Service Manual Manual pdf 16 page image

16 English 5.906-520.0 Rev. 00 (03/12)1 Top seal ring, to the appliance hood2 Suction turbine3 Bottom seal ring, to the turbine holder Replace the suction turbine. Check the seal rings for damage. Replace damaged seal rings. Align the suction turbine inside the turbine holdersby means of the seal rings during installation.1 Glide contact (carbon brush)2 Contact part Unscrew the screws of the contact part. Pull the contact part off toward the top, do notbend the plug contact. Remove the glide contact and replace it. Install a new glide contact; no adjustments neces-sary. Always replace both glide contacts at once. Unscrew the fastening screws of the traction relief. Disconnect the connecting cable of the mains ca-ble on the appliance electronics and on the appli-ance switch. Replace the mains cable.8.8.1 Replace the glide contacts of the suctionturbine.8.9 Replacing the mains cable