– 41 Transport handle, retractable2 Recessed grip to open the filter cover3 Operating panel of the station4 ON/OFF switch of the station5 IR sender6 Suction hole7 Access ramp for the cleaning robot (todock onto the station)8 Battery contacts9 Power cordOperating panel of station (3)A Indicator lamp (green) - parking thecleaning robotB “Parking the cleaning robot” button –ON/OFFC “Select cleaning duration” buttonD Indicator lamp (green) – 3 hours ofcleaningE Indicator lamp (green) – 6 hours ofcleaningF Indicator lamp (green) – 9 hours ofcleaningG Indicator lamp (green) - continuouscleaningH Indicator lamp (red) - filter fullI Button "quiet mode" – ON/OFFJ Indicator lamp (green) – quiet modeCleaning robot10 Button "Switch on cleaning robot“11 Button "Switch off cleaning robot“12 LEDs(Green - operation / red - failure)13 Battery contacts14 IR receiver15 Safety bumper16 Brush roller17 Optical sensors (4x)18 Battery packs (2x)19 Locking lever dirt receptacle (2x)20 Cover of the dirt receptacle21 Dirt receptacleThe packaging material can be recy-cled. Please do not place the packag-ing into the ordinary refuse for disposal, butarrange for the proper recycling.Illustration When you unpack the system, checkthat everything is complete.If there are any missing parts or you de-tect any transport damage when un-packing, please inform your dealerimmediately.Illustration Hold the access ramp tilted. Insert thecut-outs of the station into the pins ofthe access ramp. Press the station and the access rampdownwards until the connection locksinto place.When you select the location of the station,please make sure that the cleaning robot isvery likely to pass the infrared beam againand again to easily find its way back to thestation.Illustration Secure the power cord in the cablehooks. Please make sure that the pow-er cord is guided through the opening inthe housing.Note: Uncoil the power cord only to therequired length. Place the station on a level surface.Operating elementsIllustrations on fold-outpages!Station for cleaning robotPreparing for start-upUnpacking the ApplianceInstalling the access ramp of thestationInstallation Notes for the Station22 EN