Kärcher SC 1502 Instruction Manual

Also see for SC 1502: Operating instructions

Kärcher SC 1502 Instruction Manual Manual pdf 22 page image

22 – English SC 1502Power nozzle (D4)The power nozzle is attached directly or usingthe extension piece (D2) on the detail nozzle.The power nozzle increases the emission speedof the steam.Application:– removal of especially stubborn dirt– blowing out corners, joints, etc.Manual nozzle (E1)Pull the terry cloth cover (E2) over the manualnozzle.Application:– small, washable surfaces, such as kitchensurfaces made of plastic, tiled walls– windows, mirrors– furniture fabrics– vehicle interior, windscreens– bath-tubsWindow nozzle (F1)Application:– windows– mirrors– glass surfaces on shower cubicles– other glass surfaces• Apply steam to the glass surface from adistance of approximately 20 cm until thesurface is moistened evenly. The push the lock(C3) to the rear to prevent an undesiredactuation of the steam switch (C4). Strip theglass surface in straight lines from the top tothe bottom using the rubber lip of the windownozzle. Wipe the rubber lip and the bottomedge of the window dry after each strip.Steam gun (C1)You can use the steam gun without any additio-nal accessories.Application:– elimination of odours and creases fromgarments:Apply steam to the hanging garment from adistance of 10–20cm.– removing dust from plants:Respect a distance of 20-40 cm.– dusting with a damp cloth:Apply a small amount of steam to a cloth, andthen use this cloth to wipe over the furniture.Detail nozzle (D1)The closer you hold the nozzle to the dirty spot,the higher the cleaning effect as temperatureand pressure of the steam reach their maximumvalues immediately when they are emitted fromthe nozzle.Application:– fittings, drains– wash-basins, toilets– blinds, radiators– stainless steel, enamelled surfaces– Removing stains:Moisten stubborn limestone with vinegar, andallow to react for approximately 5 minutes.Extension piece (D2)The extension piece is attached to the detailnozzle.Application:– inaccessible gaps, joints, etc.Round brush (D3)The round brush is attached directly or using theextension piece (D2) on the detail nozzle.The round brush is not suited for the cleaning ofdelicate surfaces.Application:– locations that are difficult to access, such ascorners and joints– fittings, drains5. How to use the accessories