Kärcher WATERCLEAN A 2011201 Operating Instructions Manual

Also see for WaterClean 600 LP: Service handbook Operating instructions

Contents

Kärcher WATERCLEAN A 2011201 Operating Instructions Manual Manual pdf 15 page image

WTC 600 LP / MP3Safety NotesVersion 06/05ContentsEquipment Components1 Sand filter2 Activated carbon filter3 Control, activated carbon filter4 Control, sand filter5 Manometer, sand filter supply pressure6 Manometer, activated carbon filter supplypressure7 RO filter unit8 Switch box9 Operating mode switch10 Control panel11 Manometer, pump pressure12 Manometer, concentrate pressure13 Concentrate control valve14 Pressure control valve15 Manometer, fine filter supply pressure16 Manometer, fine filter output pressure17 Fine filter unit18 Power outlets, sand and activated carbonfilter19 Power outlets (3x) for metering stations20 Main switch1 Safety NotesDrinking Water❑ Drinking water quality is ensured only when theequipment is controlled within the scheduledperiods. Observe the given control intervals.❑ Have the drinking water quality checked in reg-ular intervals; the valid drinking water regula-tions are to be observed.Chemicals❑ Wear acid-resistant protective clothing (gog-gles and gloves).❑ Store chemicals cool and dry, however, notbelow 5 °C.❑ Keep chemicals at locations not accessible forchildren.❑ Ensure good room ventilation and provide awashing facility.❑ Have eye wash bottle readily available.Electrical Equipment❑ Work on the electrical equipment is to be car-ried out only by skilled persons for electricalwork.❑ Never touch damaged or cut through mainscables; pull the mains plug immediately, asrequired.❑ Never operate the equipment with a damagedcable.2 Intended UseThe equipment is used for conditioning of surfacewater, well water and river water.Depending on the untreated water quality,the modular set-up enables secure separationof turbid materials, water hardeners, salts andbacteria/virus.1 Safety Notes...........................................32 Intended Use ..........................................33 Maintenance and Care ...........................43.1 Starting Operation ..................................43.1.1 Admission-pressure Unit ........................43.1.2 Filling the Metering Stations ...................43.1.3 Switching On the Equipment ..................53.1.4 Operating Indicators ...............................53.2 During Operation ....................................53.2.1 Control and Corrective Action Intervals..53.2.2 Sand and Activated Carbon Filter ..........63.2.3 Bleeding the Metering Pump ..................63.2.4 Replacing the Fine Filter ........................73.2.5 Fine Adjustment of the Operating Pressu-res ...............................................................73.2.6 Mixing the Chemicals .............................83.3 Switching Off the Equipment ..................94 Consumption Materials...........................95 Malfunctions .........................................106 Technical Data .....................................117 EU Declaration of Conformity...............12Safe operation of the equipment ispossible only when the operating in-structions and safety notes are readcompletely, and the instructions con-tained therein are strictly followed.