K2 Mounts K2 Series Manual
                | |
Contents
| 
4 www.k2mounts.comInstallationInstalling your Screen Wall Mount bracket involves the following steps:1. Determine the Wall Mounting Location2. Attach the Mounting Plate to the Wall3. Attach the Mounting Brackets to the screen4. Hang the screen on the Mounting Plate5. Adjust the Screen Angle (K2-T-S and K3-T-S only)6. Position the CablesDetermine the Wall Mounting Location1. Decide where you want to hang your screen. A good location is near an electrical outlet,and within cable reach of any components you plan to connect to the screen.! Warning:Use common sense when determining the wall mounting location. For example, donot hang your screen over a bed, crib, or child’s play area.2. Draw a mark on the wall where you want the center of the mounted screen to be located.This will be refered to as the “Mounted screen Center Point” throughout this manual.3. If you are mounting to a wood stud wall, continue onto the next page. If you are mountingto a concrete or concrete block wall, go to page 7. |
Related manuals for K2 Mounts K2 Series
manualsdatabase
Your AI-powered manual search engine