KALI AUDIO WS-12 User Manual
                 | |
KALI AUDIO WS-12 Studio/Live Subwoofer User’s Guide11Dip SwitchesLike the LP-Series Studio Monitors, the WS-12 features easy-to-use dip switches on theback that help you configure it to your specific application. Note that each set of switch-es is completely independent of one another, so any adjustments you make to one set ofswitches will not affect any other set of switches.Switches 1-4: CrossoverThese switches control a low-pass filter that passes signal to the subwoofer, and a high-pass filter that passes signal out through the XLR outputs. If you’re using more than 2 full-range speakers, it is recommended to set the crossover to “External” and use an externalprocessor and crossover.Position 1: LP-6The subwoofer is connected to a stereo pair of Kali Audio LP-6 Studio Monitors. For bestresults, turn volume control on the subwoofer and both monitors to the center detente.As long as the subwoofer is roughly the same distance to the listener as the monitors, thevolume of the subwoofer will be matched to the monitors.Switch 1: DOWNSwitch 2: DOWNSwitch 3: DOWNSwitch 4: DOWNPosition 2: LP-8/IN-8The subwoofer is connected to a stereo pair of Kali Audio LP-8 or IN-8 Studio Monitors.For best results, turn volume control on the subwoofer and both monitors to the centerdetente. As long as the subwoofer is roughly the same distance to the listener as themonitors, the volume of the subwoofer will be matched to the monitors.Switch 1: UPSwitch 2: DOWNSwitch 3: DOWNSwitch 4: DOWNPosition 9: LFEThe subwoofer is being used as a dedicated subwoofer for Low Frequency Effects (LFE)while mixing for film.Switch 1: DOWNSwitch 2: DOWNSwitch 3: DOWNSwitch 4: UP |
Related manuals for KALI AUDIO WS-12
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine