Komodo II CoaXPress Frame Grabber Hardware and Installation Guide 16In additional to CoaXPress links LEDs, the Komodo II Board is equipped with statusLEDs.CH 0 LEDCH 1 LEDCH 2 LEDCH 3 LEDLED 0 LED 1 LED 2 LED 3Figure 5: Komodo II Board LED’s locationsBoard Status LEDs functionality is described in Table 2:LED # DescriptionLED 0 Alive led. Blinks when the board receivesclock from PCIeLED 1 PCIe L0 state. When lit, indicates that thePCIe interface is powered up at active state.LED 2 Gen3 PCIe indicator. When lit indicatesthat PCIe is working as Gen3. When not litthe boards works either as PCIe Gen1 orGen2LED 3 Lane's indicator. When lit, indicates that all8 PCIe lanes are up. If not lit, one or fourlanes are up.Table 2: Board status LED’sKomodo II Hardware ReferenceThis chapter provides information on Komodo II board hardware. It covers architecture,features and pin assignments for various connectors.Installation and Configurations