KEB COMBIVERT F5 Installation Manual

Also see for COMBIVERT F5: INSTALLATION GUIDELINE Installation manual Instruction manual Instruction manual Installation manual

Contents

3.2 Housing G and HThe mechanical installation is dependent on the housing. The housing can be identifiedthrough the 7th digit of the material number:• xxF5xxG-xxxx => housing G• xxF5xxH-xxxx => housing H3.2.1 Demounting the device4 53211 Cut-outs for cover fixing 4 Operator2 Screws M2.5 x 6 5 Latch for operator3 CoverFigure 3: Demounting the device housing G and HPreparing for Installation• Solve operator (4) by pressing on the latch (5) and pull upwards• Press the cover (3) out of the cut-outs (1) and tilt upwards• Remove cover (3) forward• Unscrew screws (2) from the distance pins (included distance pins are not required fordevices with functional safety. These must be mounted first for other devices).GB -12Mechanical installation