KEB COMBIVERT F5 Instruction Manual

Also see for COMBIVERT F5: INSTALLATION GUIDELINE Installation manual Instruction manual Instruction manual Installation manual

Contents

Encoder Interface HTL Output on Channel 2GB - 73.3 Channel 2Terminal strip X3BInterface type Incremental encoder simulation (output)Output signals HTL 20…26 V (input voltage - 4 V)max. 30 mA per output (briefly short-circuit proof)Outputs / tracks A+, A-, B+, B-, N+, N-Input Voltage input for HTL signal levelIncrements per revolution programmableMax. line length 50 m, the value is additionally limited by the signal fre-quency, cable capacity and supply voltage.3.3.1 Description of terminal strip X3BStripping length mm 7Tightening torque Nm 0,22lb inch 2Conductor cross-sec-tion (min)mm² 0,14AWG 28Conductor cross-sec-tion (max)mm² 1,5AWG 16PIN Name Description1 A+ Encoder track A HTL signal+2 B+ Encoder track B HTL signal+3 N+ Zero track HTL signal+4 A- Encoder track A HTL signal-5 B- Encoder track B HTL signal-6 N- Zero track HTL signal-7 24 V Voltage input 24…30 V, if higher HTL level are required.8 COM Reference potential for voltage supply. Reference potential for encodertracks, if the signals are used as single-ended signals (without inversesignals).

/ 10

Related manuals for KEB COMBIVERT F5